Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 PEG-Free Emulsion for Baby Wipe - Happi

PEG-Free Emulsion for Baby Wipe

PEG-Free Emulsion for Baby Wipe
Ingredients
%

Phase A

  • Deionized water
  • 39.03

0

  • Glycerin (Protameen)
  • 5.00
  • Alpha-Bisabol Natural (Bisabol) (Symrise)
  • 0.20
  • Vitamin E Acetate (Protameen) (Tocopheryl acetate)
  • 0.20
  • Glucate DO Emulsifier (Lubirzol) (Methyl glucose dioleate)
  • 0.20
  • Pemulen TR-2 Polymer (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer)
  • 0.12

Phase B

  • Schercemol 1818 Ester (Lubrizol) (Isostearyl isostearate)
  • 2.00

Phase C

  • Sodium hydroxide (5%)
  • 0.25

Phase D

  • Plantacare 818 UP (Cognis) (Coco-glucoside (50%))
  • 2.00

Phase E

  • Euxyl PE 9010 (Schu00fclke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
  • 1.00

Phase F

  • Deionized water
  • 50.00

Procedure

Phase A—Add glycerin to deionized water. Phase B—add ingredients 3-6 in a separate vessel.  Disperse Pemulen TR-2 Polymer into oil phase. Add phase B to phase A. Mix for 20-30 minutes to allow the polymer to swell. Neutralize batch with sodium hydroxide (5%). Mix vigorously until uniform. Add coco-glucoside. Mix slowly to avoid air entrapment. Add preservative (phase E).  Mix until uniform. Dilute with deionized water. Mix until uniform.

Properties

Appearance—thin white lotion; pH—5.8-6.2; Viscosity (mPa·s) (Brookfield RVT @ 20 rpm, 25°C, #2 spindle, measured after 24 hours)—400-700; Stability—passed 3 months @ 45°C and RT, Passed 5 cycles freeze/thaw.

More Information

This formula has not been tested on any nonwoven substrate, but is a suggested starting point formulation to help meet difficult viscosity and emulsion stability criteria. Preservation and stability may be dependant on the non-woven substrate that is used for application.